IS single-stage centrifugal pump product features a. Can transport water and a variety of corrosive media substances (viscosity similar to water) b. Density range P = 1.0-1.84 * 10 cubic kg / m cubic c. Medium temperature at -20 ° s + d range between 160 to read the system working pressure = <1.6MPa namely:.. system pressure = inlet pressure + pump suction pressure valve closing at work = <1.6MPa e flow 3.4-460m cube / n lift H3.6-132m special cases (high temperature, high pressure and special materials) Please make when ordering in advance, in order to provide a more reliable product. Material: As the pump is mainly used to transport corrosive media, so its flow components (ie, pump, pump cover and impeller) are made of stainless steel material below, users need choose other special materials, made in advance when ordering please. 4, the axial IS centrifugal water pump seal ring is made gland IS50-32-125A pump, packing rings and packing, etc., in order to prevent leakage into the air or a lot. IS pump impeller, if the balance is equipped with soft packing cavity with suction impeller connected, such as a liquid in a vacuum impeller entrance IS50-32-160 water pump, it is very easy along the surface of the intake sleeve, so packing rings fitted in the cavity filler cap hole through the pump, the pump chamber pressure of water lead to the packing ring seal. If there is no pump impeller balance holes, due to the back of the impeller fluid pressure greater than atmospheric pressure, and thus there is no leakage problems, it is time to install the packing rings. 5, IS centrifugal water pump shaft to avoid wear and tear, the axis through the packing chamber fitted sleeve to protect the site. O-ring between the quasi sleeve and the shaft to prevent along with the surface of the intake or leaking. 6, IS centrifugal water pump drive is through lengthened flexible coupling with the motor connected, the direction of rotation of the pump, see the pump from the drive side, clockwise rotation. 7, IS centrifugal pump water pump in order to balance the axial force, before most of the pump impeller has a sealing ring after IS50-32-125 water pump and impeller rear panel features balanced hole, because some not to force the pump shaft, impeller seal ring and the back of the hole does not have a balance. IS50-32-200 water pump _ _ water pump impeller (View) Ltd provided by Shijiazhuang-school Pump. Shijiazhuang-faction Pump Co. (www.shipaipump.com) is a professional, "slurry pumps, submersible sewage pumps, sewage pumps, chemical pumps, pulp pump, water pump, mud pump, multi-stage" companies. Since its inception, we adhere to the "good faith, sound management" approach, the courage of healthy competition in the market, so that the "Shijiazhuang-faction" brand has a good reputation. We adhere to the "service first, customers first" principle, so Shijiazhuang-pump in the other faction has won the trust of customers in the congregation, and establish a good corporate image. Special Note: This information is for reference pictures and information, please contact us to obtain the most accurate information, thank you!