The products are widely used: acid, alkali, salt, oil, food and alcoholic beverages, organic solvents and other liquids, especially for the transmission of strongly corrosive substances containing fine particulate. ★ installation and maintenance 1, according to the basis of good size concrete foundation, to be buried with the Progressive good anchor bolts; 2, before installing the pump and motor response inspect lined slurry pump, all parts should be non-destructive, should be no debris in the pump; 3, the unit on the basis of fluorine plastic mortar pump, between the floor and put a pair of chocks pump base, by adjusting the wedge pad, aligning the pump level. After adjustment, tighten the bolt; 6) low coefficient of friction: the friction within the pump system is only 0.07-0.11 mortar pump mechanical seal, it has a self-lubricating. In the water-lubricated conditions, the dynamic friction coefficient is lower than PA66 and POM (POM) half. When the form of a sliding or rotating work even better than steel and brass plus lubricant after lubrication. 300UHB-ZK-700-40 (Figure) | fluorine mortar pump | Pump Co. sent by Shijiazhuang-pump. Shijiazhuang-school Pump Co., Ltd. (www.shipaipump.com) adhere to the "people-oriented" business philosophy, with a professional staff, and strive to provide the best products and services to contribute to society, and to welcome new and old customers throughout the visit, sincere cooperation for a better future. Shijiazhuang-school Pump - your trusted friend, Company Address: 186 Shijiazhuang Youyi Street, Contact: Manager Xu.