III. Pump installation 1. Install base (1) pump installed base must be firm, and can absorb the vibration of the pump and permanent support units, must be sufficient to support the basis of 1.5 times the unit weight (including motor). Usually reinforced concrete for the foundation. The basis weight of its own: the motor direct-coupled type, was more than three times the weight of the machinery; engines (such as diesel) Direct the type 6SH-6A double-suction centrifugal pump, more than five times compared to mechanical weight. Pump installation, starting, running, stopping 1. Installation sequence (1). The base on the foundation, horn 8SH-6 double-suction centrifugal pump in anchor bolt will be used to adjust the wedge in between the horn method of correcting level 6SH-9A double suction centrifugal pump, and anchor bolts properly tightened to prevent move. (2) between the base and the foot pump pouring of concrete. (3) After the concrete dries tighten the bolt and re-check the level of the pump. (4) the concentricity of the motor shaft and the pump calibration. (5) Check the motor rotation coincides with the pump after the turn, mounted on the coupling of the coupling pin. (6) pipeline pumps out extra bracket support should not be supported by the pump. 8SH-6 double-suction centrifugal pumps | double suction centrifugal pump | double suction pump provided by the Shijiazhuang-Pump Co., Ltd. faction. Shijiazhuang-school Pump Co., Ltd. (www.shipaipump.com) strong, credible, and other industries in other Shijiazhuang, Hebei accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Shijiazhuang-faction pump into the brilliant and you work for a better future!