(5) Filling the pump housing to pay attention to fully filling 14SH-13A double suction centrifugal pump, not a hollow double-suction centrifugal pumps, filling should not have continued for a long interruption. Filling a direct impact on vibration and noise pump unit 14SH-19 double suction pump, so be careful careful. A S-type pump assembly and disassembly of the assembly and disassembly of the rotor part 1. (1) of the shaft flat on the platform or other suitable support; (2) the impeller key into the shaft center of the keyway, fitted with impeller ; (3) the seal ring on the impeller; (4) in turn fitted on both sides of the impeller O-ring or pad, impeller gear sets, bushings, packing bushings, bearings gear sets, packing ring, packing gland, retaining ring; if seal installed, do not install the packing rings and packing gland, and the gland seal installed and the machine (or cartridge mechanical seal), will be installed at the same time to replace the packing seal installed with the sleeve with the sleeve. Double Suction Pump | 14SH-13 double-suction centrifugal pump | in a pump (high merchant) Ltd provided by the Shijiazhuang-send pump. Shijiazhuang-school Pump Co., Ltd. (www.shipaipump.com) is specialized in "slurry pumps, submersible pumps, sewage pumps, chemical pump, pulp pump, water pump, mud pump, multi-stage" of the enterprise, the company of " honesty, hard service "concept, to provide you with the highest quality products and services. Welcome to inquire! Contact: Manager Xu.