In the condensation process, the liquid particles from around the center of the bubble to accelerate the movement, slurry, at the moment coagulation, D-type single-hull slurry pump, particle impact each other, dredging slurry pumps, generating considerable local pressure. If these bubbles burst in the vicinity of the metal surface to condense the liquid particles like so many small warhead as coal washing plant for pumps, continuous hammering on the metal surface. 4.1 Maximum Performance with rubber impeller head should not exceed 63m. The maximum allowed by the line speed should not exceed 30m / m. 4.2 Rolling bearings generally used, and the use of thin oil or grease lubrication, the operating temperature should not exceed 75 ° C. 4.3 gear pumps can be used flexible couplings, belts or hydraulic couplers. Couplings, V belt and pulley should be safety shield. 4.4 For the rubber inner shell bivalve pump, the maximum size of the slurry of solid particles should not exceed 3mm, no sharp edges and corners; for single-hull pump, metal inner shell bivalve pump, slurry of solid particles of maximum size should not exceed 80% of the flow cross-section of minimum size. 4.5 packing water pressure should be higher than the pump discharge pressure of 35kPa. Slurry pump, D-type single-hull slurry pump, 65D-A30 slurry pump (certified merchants) Ltd provided by the Shijiazhuang-send pump. Shijiazhuang-school Pump Co., Ltd. (www.shipaipump.com) is specialized in "slurry pumps, submersible pumps, sewage pumps, chemical pump, pulp pump, water pump, mud pump, multi-stage" of the enterprise, the company of " honesty, hard service "concept, to provide you with the highest quality products and services. Welcome to inquire! Contact: Manager Xu.